漢高熱熔膠TECHNOMELT PA 6812

MACROMELT 6812 is a hotmelt adhesive especially suitable for porous substrates such as paper, wood and leather. Application: Application Temperature : 225 to 240 °C Application System : Hotmelt application systems When bonding to a substrate with high thermal conductivity the use of a specific application temperature is required for good wetting. Do not heat the product above the specified application temperature range. When the product is not in use do not apply heat, this will degrade the quality of the product and in extreme cases cause carbonisation. The standby temperature for the product is approximately 50°C below the application temperature, but not for longer than 72 hours. MACROMELT 6812 may absorb moisture from the air. This will not be apparent in the solid form, but may cause bubbles on heating and could affect the bond quality. It is important, therefore, that containers are kept closed and sealed when not in use.Macromelt 6812是一種熱熔膠，特別適用于紙張、木材和皮革等多孔基材。 應用： 使用溫度：225至240°C 應用系統：熱熔應用系統當結合到具有高導熱性的基板時，需要使用特定的應用溫度才能獲得良好的潤濕性。 不要將產品加熱到超過規定的應用溫度范圍。當產品不使用時，不要加熱，這會降低產品質量，在情況下會導致碳化。產品的備用溫度約低于應用溫度50°C，但不超過72小時。 Macromelt 6812可吸收空氣中的水分。這在固體形態中不明顯，但可能在加熱時引起氣泡，并可能影響粘合質量。因此，重要的是，容器在不使用時要保持封閉和密封。